The Challenges and Opportunities for TiO2 Nanostructures in Gas Sensing.

Chemiresistive gas sensors based on metal oxides have been widely applied in industrial monitoring, medical diagnosis, environmental pollutant detection, and food safety. To further enhance the gas sensing performance, researchers have worked to modify the structure and function of the material so that it can adapt to different gas types and environmental conditions. Among the numerous gas-sensitive materials, n-type TiO2 semiconductors are a focus of attention for their high stability, excellent biosafety, controllable carrier concentration, and low manufacturing cost. This Perspective first introduces the sensing mechanism of TiO2 nanostructures and composite TiO2-based nanomaterials and then analyzes the relationship between their gas-sensitive properties and their structure and composition, focusing also on technical issues such as doping, heterojunctions, and functional applications. The applications and challenges of TiO2-based nanostructured gas sensors in food safety, medical diagnosis, environmental detection, and other fields are also summarized in detail. Finally, in the context of their practical application challenges, future development technologies and new sensing concepts are explored, providing new ideas and directions for the development of multifunctional intelligent gas sensors in various application fields.

Recent Advances and Challenges in Efficient Selective Photocatalytic CO2 Methanation.

Solar-driven carbon dioxide (CO2 ) methanation holds significant research value in the context of carbon emission reduction and energy crisis. However, this eight-electron catalytic reaction presents substantial challenges in catalytic activity and selectivity. In this regard, researchers have conducted extensive exploration and achieved significant developments. This review provides an overview of the recent advances and challenges in efficient selective photocatalytic CO2 methanation. It begins by discussing the fundamental principles and challenges in detail, analyzing strategies for improving the efficiency of photocatalytic CO2 conversion to CH4 comprehensively. Subsequently, it outlines the recent applications and advanced characterization methods for photocatalytic CO2 methanation. Finally, this review highlights the prospects and opportunities in this area, aiming to inspire CO2 conversion into high-value CH4 and shed light on the research of catalytic mechanisms.

Electronic Structure Modulation of Oxygen-Enriched Defective CdS for Efficient Photocatalytic H2 O2 Production.

Artificial photosynthesis for hydrogen peroxide (H2 O2 ) presents a sustainable and environmentally friendly approach to generate clean fuel and chemicals. However, the catalytic activity is hindered by challenges such as severe charge recombination, insufficient active sites, and poor selectivity. Here, a robust strategy is proposed to regulate the electronic structure of catalyst by the collaborative effect of defect engineering and dopant. The well designed oxygen-doped CdS nanorods with S2- defects and Cd2+ 4d10 electron configuration (CdS-O,Sv ) is successfully synthesized, and the Cd2+ active sites around S defects or oxygen atoms exhibit rapid charge separation, suppressed carrier recombination, and enhanced charge utilization. Consequently, a remarkable H2 O2 production rate of 1.62 mmol g-1  h-1 under air conditions is acquired, with an apparent quantum yield (AQY) of 9.96% at a single wavelength of 450 nm. This work provides valuable insights into the synergistic effect between defect and doping on catalytic activity.

Recent advances in ambient-stable black phosphorus materials for artificial catalytic nitrogen cycle in environment and energy.

Nitrogen cycle is crucial for the Earth's ecosystem and human-nature coexistence. However, excessive fertilizer use and industrial contamination disrupt this balance. Semiconductor-based artificial nitrogen cycle strategies are being actively researched to address this issue. Black phosphorus (BP) exhibits remarkable performance and significant potential in this area due to its unique physical and chemical properties. Nevertheless, its practical application is hindered by ambient instability. This review covers the synthesis methods of BP materials, analyzes their instability factors under environmental conditions, discusses stability improvement strategies, and provides an overview of the applications of ambient-stable BP materials in nitrogen cycle, including N2 fixation, NO3- reduction, NOx removal and nitrides sensing. The review concludes by summarizing the challenges and prospects of BP materials in the nitrogen cycle, offering valuable guidance to researchers.

Recent advances of pure/independent covalent organic framework membrane materials: preparation, properties and separation applications.

Covalent organic frameworks (COF) are porous crystalline polymers connected by covalent bonds. Due to their inherent high specific surface area, tunable pore size, and good stability, they have attracted extensive attention from researchers. In recent years, COF membrane materials developed rapidly, and a large amount of research work has been presented on the preparation methods, properties, and applications of COF membranes. This review focuses on the research on independent/pure continuous COF membranes. First, based on the membrane formation mechanism, COF membrane preparation methods are categorized into two main groups: bottom-up and top-down. Four methods are presented, namely, solvothermal, interfacial polymerization, steam-assisted conversion, and layer by layer. Then, the aperture, hydrophilicity/hydrophobicity and surface charge properties of COF membranes are summarized and outlined. According to the application directions of gas separation, water treatment, organic solvent nanofiltration, pervaporation and energy, the latest research results of COF membranes are presented. Finally, the challenges and future directions of COF membranes are summarized and an outlook provided. It is hoped that this work will inspire and motivate researchers in related fields.

Molecular Genetic Study on HAND2 Gene Promoter in Ventricular Septal Defect.

Ventricular septal defect (VSD), the most common type of congenital heart disease (CHD), is primarily caused by cardiac dysplasia. Heart and neural crest derivatives expressed 2 (HAND2) participates in developing the right heart. The loss of HAND2 expression in humans is closely connected with ventricular septal defects. We used a case-control study to analyze the genetic variations in the HAND2 promoter region in VSD patients and controls. Some statistical analysis methods were used to analyze the association of single nucleotide polymorphisms (SNPs) with VSD. The dual-luciferase reporter assay and electrophoretic mobility shift assay (EMSA) were used to conduct functional analysis and molecular mechanism study of genetic variations. Through sequencing, we identified nine genetic variants in patients with VSD. The SNP rs2276940 G>T and rs2276941 G>A were associated with an increased risk of VSD. The dual-luciferase reporter assay showed that SNP rs2276940 G>T and rs138531627 C>G decreased the transcriptional activity of the HAND2 promoter. Transcription factors (TFs) predicting suggested that all three SNPs may change the binding of TFs. The result of EMSA showed that rs138531627 C>G may create a new binding site for TFs while rs2276940 G>T enhanced the binding affinity for TFs. These results indicated that genetic variants of the HAND2 promoter may increase the risk of VSD, and the molecular mechanism may be the change of the binding affinity of TFs.

Multifunctional Solar Evaporator with Adjustable Island Structure Improves Performance and Salt Discharge Capacity of Desalination.

Interfacial solar steam generation (ISSG) is the main method to get fresh water from seawater or wastewater. The balance between evaporation rate and salt resistance is still a major challenge for ISSG. Herein, a wood aerogel island solar evaporator (WAISE) with tunable surface structure and wettability by synthesizing poly(n-isopropylacrylamide)-modified multi-walled carbon nanotube photothermal layers. Compared to dense surface structure evaporators, interfacial moisture transport, thermal localization, and surface water vapor diffusion of WAISE are greatly promoted, and the evaporation rate of WAISE increased by 87.64%. WAISE allows for record performance of 200 h continuous operation in 20% NaCl solution without salt accumulation. In addition, the photo-thermal-electric device is developed based on WAISE with continuous water purification, power generation, and irrigation functions. This work provides a new direction for the development of multifunctional water purification systems.

Biomimetic cellulose-nanocrystalline-based composite membrane with high flux for efficient purification of oil-in-water emulsions.

The massive discharge of oily wastewater and oil spills are causing serious pollution to water resources. It is urgent to require clean and efficient method of purifying oily emulsions. Although the separation membranes with selective wettability have been widely used in the efficient purification of oil/water emulsions. It is still very challenging to develop functional films that are environmentally friendly, fouling resistant, inexpensive, easy to prepare, easy to scale, and highly efficient. Cellulose nanocrystalline-based composite membranes (CCM) were prepared by surface-initiated atom transfer radical polymerization (SATRP) and vacuum self-assembly. The prepared CCM is superhydrophilic and superoleophobic underwater due to the hydrophilic nature of the modified cellulose-nanocrystalline and the micro-nano surface structure. The CCM shows high separation efficiency (> 99.9 %), high flux (16,692 L-1·m-2·h-1·bar-1) for surfactant-stabilized oil-in-water emulsions, good cycle stability and anti-fouling performance. This biomass-derived membrane is green, cheap, easy to manufacture, scalable, super-wettability, and durability, it promises to be an alternative to separation membranes in today's market.

Pyro-Phototronic Effect Enhanced Pyramid Structured p-Si/n-ZnO Nanowires Heterojunction Photodetector.

The emergence of nanomaterials has brought about the development of miniature photodetectors into a new stage, and ZnO nanomaterials are currently one of the most popular research objects. Here, the performance of a photodetector consisting of micropyramid structured p-Si/n-ZnO NWs heterojunction constructed by an anisotropic chemical etching and hydrothermal method is optimized by using the pyro-phototronic effect, and the photoresponses of the device to 405 and 648 nm lasers are investigated. The results show that, with the introduction of pyro-phototronic effect, the photoresponsivity Rpyro increases to 208 times that of Rphoto when the wavelength is 405 nm and the optical power density is 0.0693 mW/cm2. Moreover, with the increase of the chopper frequency, the photocurrent increases by more than 3 times, and the photoresponsivity is also increased by a factor of 4.5, making it possible to detect ultrafast pulsed light. In addition, in order to increase the current collection efficiency, a thin film Al layer was deposited as the back electrode on the basis of the device, and the photocurrent and photoresponsivity are significantly improved. Finally, the coupling between the pyro-phototronic effect and the piezo-phototronic effect is analyzed by applying compressive strain to the photodetector. When the compressive strain is -1.02%, the photocurrent decreases by 31.4% and the photoresponsivity decreases by 27.9% due to the opposite direction between laser illumination induced pyroelectric polarization charges and compressive strain induced piezoelectric polarization charges. This work not only demonstrates the great potential of pyro-phototronic effect in enhancing the silicon-based heterojunction photodetectors for high-performance photodetection and ultrafast pulsed light detection but also provides assistance for a better understanding of the coupling mechanism between pyro-phototronic and piezo-phototronic effects.

Two-dimensional nanomaterials: synthesis and applications in photothermal catalysis.

Photothermal catalysis, as one of the emerging technologies with synergistic effects of photochemistry and thermochemistry, is highly attractive in the fields of environment and energy. Two-dimensional (2D) nanomaterials have received extensive attention toward photothermal catalysis because of their ultrathin layer structures, superior physical and optical properties, and high surface areas. These merits are beneficial for shortening the transfer distance of charge carriers, improving the efficiency of solar to thermal, and providing a great opportunity for the development of photothermal chemistry. In this review, we have summarized the state-of-art advances in various 2D nanomaterials with emphasis on the driving force and relevant mechanism of photothermal catalysis, including the involved three types, namely, localized surface plasmonic resonance (LSPR), nonradiative relaxation, and thermal vibrations of molecules. Moreover, the synthesis strategies of 2D materials and their photothermal applications in carbon dioxide (CO2) conversion, hydrogen (H2) production, volatile organic compounds (VOCs) degradation, and water (H2O) purification have been discussed in detail. Ultimately, the existing challenges and prospects of future development in the field are proposed. It is believed that this review will afford a great reference for the exploration of the high-efficiency 2D nanomaterials and their structure-activity relationship.

Indirect Comparison of Cryoablation and Radiofrequency Ablation as Initial Therapy for Symptomatic Paroxysmal Atrial Fibrillation: A Systematic Review and Network Meta-Analysis of Randomized Controlled Trials.

INTRODUCTION: Data on first-line ablation treatment for patients with symptomatic atrial fibrillation (AF) are scarce. This study indirectly compared the efficacy and safety of cryoballoon ablation (CBA) versus radiofrequency ablation (RFA) as initial therapy for symptomatic AF. METHODS: We searched the EMBASE, PubMed, Cochrane Library, and ClinicalTrials.gov databases for randomized controlled trials (RCTs) that compared CBA or RFA with antiarrhythmic drugs (AADs) as first-line treatment for AF from the time of database establishment up to December 2021. The odds ratio (OR) with a 95% confidence interval (CI) was used as a measure of the treatment effect. RESULTS: Six RCTs (3 CBA, 3 RFA) that enrolled a total of 1,215 patients were included in this analysis. There were no significant differences in atrial arrhythmia (AA) (OR 0.993, 95% CI: 0.602-1.638), symptomatic AA (OR 0.638, 95% CI: 0.344-1.182), or serious adverse events (OR 1.474, 95% CI: 0.404-5.376) between the two ablation techniques. The incidences of additional CBA therapy (OR 2.693, 95% CI: 1.277-5.681) and patients who crossed over to AAD therapy (OR 0.345, 95% CI: 0.179-0.664) in the CBA group were significantly lower than those in the RFA group. CONCLUSION: Among patients with paroxysmal AF receiving initial therapy, CBA and RFA share a similar efficacy and safety profile. When pulmonary vein isolation is performed by CBA, study crossover and the need for additional ablation are substantially lower.

A 3D smart wood membrane with high flux and efficiency for separation of stabilized oil/water emulsions.

Oily sewage discharged from indiscriminate industrial and frequent oil spills have become a serious global problem. There is an urgent need to separate stable oil/water emulsions by efficient and environmentally friendly methods. Membrane separation technology has the advantages of low energy consumption and low cost, thus is an effective solution to the problems of oily wastewater. However, the manufacture of multifunctional membranes with high efficiency, high flux and self-cleaning using renewable materials remains a challenge. Herein, three-dimensional (3D) smart membranes with switchable superhydrophobic-hydrophilic surfaces were prepared by grafting photo-responsive poly-spiropyran (PSP) on wood-based substrates via surface atom transfer radical polymerization. This novel membrane can efficiently separate stabilized water-in-oil and oil-in-water emulsions due to reversible hydrophilic-hydrophobic transition by switching UV and visible light irradiation. Remarkably, after immobilization, the PSP grafted on the wood substrate exhibited a faster photo response effect than the free spiropyran (SP). More importantly, the prepared 3D smart membranes showed exceptional high flux (4392 L•m-2•h-1) and efficiency (above 99.99 %), good cycle stability (99.99 % after 12 times) and durability (available for at least 60 days) for the separation of surfactant-stabilized water-in-oil emulsions. This work opens a new avenue for the design of functional biomass-derived membranes for efficient and sustainable oily wastewater treatment with high flux, easy scale-up, and green regeneration.

A polydimethylsiloxane-based sponge for water purification and interfacial solar steam generation.

A better knowledge for the design and synthesis of low-cost, novel porous materials is highly desirable in various fields such as recyclable solar desalination and liquid recycling. Herein, a polydimethylsiloxane-based sponge with a web-like three-dimensional (3D) interconnected porous structure was developed for effective recovery of liquids and the continuous interfacial solar steam generation (ISSG). The sponge is capable of conducting directional transport of oil or organic solvents at temperatures above 32 °C while automatically controlling the desorption of the organic phase below 28 °C. The synergistic combination between high light absorption (above 95 %) and light-to-heat conversion efficiency (99.87 %) resulted in a considerably high seawater evaporation rate (1.66 Kg m-2h-1) under 1 sun. The self-regeneration of the evaporator is facilitated by the salt barrier function of the large channels of the smart sponge with high hydraulic conductivity. This sponge can maintain a maximum evaporation rate up to the 5 consecutive days operation with the co-benefit of real-time regeneration and the reversible switching of the wettability. The reusable smart sponge evaporators are highly efficient in generating clean water from seawater with satisfactory ion rejection rates (above 99.6 %). As such, the prepared sponge shows great potential in environmental restoration, metal recovery, and water regeneration.

Recent advances in high-crystalline conjugated organic polymeric materials for photocatalytic CO2 conversion.

The photocatalytic conversion of carbon dioxide (CO2) to high-value-added fuels is a meaningful strategy to achieve carbon neutrality and alleviate the energy crisis. However, the low efficiency, poor selectivity, and insufficient product variety greatly limit its practical applications. In this regard, conjugated organic polymeric materials including carbon nitride (g-C3N4), covalent organic frameworks (COFs), and covalent triazine frameworks (CTFs) exhibit enormous potential owing to their structural diversity and functional tunability. Nevertheless, their catalytic activities are largely suppressed by the traditional amorphous or weakly crystalline structures. Therefore, constructing relevant high-crystalline materials to ameliorate their inherent drawbacks is an efficient strategy to enhance the photocatalytic performance of conjugated organic polymeric materials. In this review, the advantages of high-crystalline organic polymeric materials including reducing the concentration of defects, enhancing the built-in electric field, reducing the interlayer hydrogen bonding, and crystal plane regulation are highlighted. Furthermore, the strategies for their synthesis such as molten-salt, solid salt template, and microwave-assisted methods are comprehensively summarized, while the modification strategies including defect engineering, element doping, surface loading, and heterojunction construction are elaborated for enhancing their photocatalytic activities. Ultimately, the challenges and opportunities of high-crystalline conjugated organic polymeric materials in photocatalytic CO2 conversion are prospected to give some inspiration and guidance for researchers.

Reviewing wood-based solar-driven interfacial evaporators for desalination.

Solar‒driven interfacial water evaporation is a convenient and efficient strategy for harvesting solar energy and desalinating seawater. However, the design and fabrication of solar evaporators still challenge reliable evaporation and practical applications. Wood-based solar-driven interfacial water evaporation emerge as a promising and environmentally friendly approach for water desalinating as it provides renewable and porous structures. In recent years, surface modifications and innovative structural designs to prepare high performance wood-based evaporators is widely explored. In this review, we firstly describe the superiority of wood for the fabrication of wood-based solar evaporators, including the pore structure, chemical structure and thermal insulation. Secondly, we summarize the recent developments in wood-based evaporators from surface carbonization, decoration with photothermal materials, bulk modification and structural design, and discuss from the aspects of water transportation capacity, thermal conductivity and photothermal efficiency. Finally, based on these previous results and analysis, we highlight the remaining challenges and potential future directions, including the selection of high-efficient photothermal materials, heat and mass transfer mechanism in wood-based evaporators including large-scale production at a low cost.

Measurement of total electron emission yield of insulators based on self-terminating charge neutralization.

For insulators, the accumulated charge on the surface after electron bombardment will interfere with the total electron emission yield (TEEY) measurement. This work develops a novel method to automatically measure the TEEY of insulators based on self-terminating charge neutralization using two neutralization electron guns. We perform theoretical analysis and experimental design for the neutralization of positive and negative charges. Positive charges are neutralized by an electron gun whose cathode is equipotential to the sample. Negative charges are neutralized by another electron gun whose cathode is adjusted to a negative potential with respect to the grounded sample, which is set between EP1/e and EP2/e. We test the control and stability performance of the TEEY measurement system based on the timing design of the electron gun switching and believe that it meets the TEEY measurement requirements. The TEEY measurements of glass, Si, and SiO2 are in good agreement with the data reported in the references, which validates the accuracy of our method in this work. We anticipate that our method provides an essential reference for the rapid TEEY measurements of insulators.

Construction of BiVO4/NiCo2O4 nanosheet Z-scheme heterojunction for highly boost solar water oxidation.

The sluggish water oxidation process is a severe obstacle for solar-driven water splitting. Therefore, it is imperative to develop a suitable photocatalyst with reduced energy barrier for strong oxidation. In this study, a Z-scheme BiVO4/NiCo2O4 (BVO/NCO) heterojunction system was designed by decorating ultrathin nickel-cobalt (NiCo2O4) spinel nanosheets on BiVO4 as an efficient photocatalyst for water oxidation. The unique structure of the system significantly reduced the energy barrier and improved the oxidation ability of BiVO4 to efficiently enhance the separation and transfer of the photogenerated carriers. Thus, the photocatalyst delivered an excellent O2 evolution performance of 1640.9 µmol∙g-1∙h-1 and showed 124% improved efficiency as compared to pristine BiVO4 and a quantum efficiency of 5.39% at 400 nm for O2 evolution. Additionally, the theoretical calculations revealed that the formation of *OOH was the rate-determining step for water oxidation. The decoration with NiCo2O4 significantly reduced the energy barrier between *O and *OOH, which eventually improved the photocatalytic performance of BVO/NCO. The results hold great promise for the potential application of spinel-based materials in efficient photocatalytic O2 evolution and offer fundamental insights into the design of efficient water oxidation heterojunctions.

Highly Selective and Efficient Solar-Light-Driven CO2 Conversion with an Ambient-Stable 2D/2D Co2 P@BP/g-C3 N4 Heterojunction.

Renewable solar-driven carbon dioxide (CO2 ) conversion to highly valuable fuels is an economical and prospective strategy for both the energy crisis and ecological environment disorder. However, the selectivity and activity of current photocatalysts have great room for improvement due to the diversification and complexity of products. Here, an ambient-stable 2D/2D Co2 P@BP/g-C3 N4 heterojunction is designed for highly selective and efficient photocatalytic CO2 reduction reaction. The resulting Co2 P@BP/g-C3 N4 material has a remarkable conversion of CO2 to carbon monoxide (CO) with an ≈96% selectivity, coupled with a dramatically increased CO generation rate of 16.21 µmol g-1 h-1 , which is 5.4 times higher than pristine graphitic carbon nitride (g-C3 N4 ). In addition, this photocatalyst exhibits good ambient stability of black phosphorus (BP) without oxidation even over 180 days. The excellent photocatalytic selectivity and activity of Co2 P@BP/g-C3 N4 heterojunction are attributed to its lower energy barriers of *COOH, *CO, and *+CO in the process of CO2 reduction, coupled with rapid charge transfer at the heterointerfaces of BP/g-C3 N4 and Co2 P/BP. This is solidly verified by both density functional theory calculation and mechanism experiments. Therefore, this work holds great promise for an ambient-stable efficient and high selectivity photocatalyst in solar-driven CO2 conversion.

The Effect of the Modification of Mica by High-Temperature Mechanochemistry on the Anticorrosion Performance of Epoxy Coatings.

Epoxy resin was directly grafted onto the surface of mica powder by high-temperature mechanical ball milling. This method was used to achieve a chemical reaction between the epoxy resin and mica that cannot be carried out under conventional circumstances. The results show that an epoxy resin layer with a thickness of approximately 10 nm formed on the surface of the mica. This modified mica filler exhibited a significant change in its hydrophilic properties. The dispersion of mica and its compatibility with organic coatings also significantly improved. In addition, the modified mica filler was added to the epoxy coating. The improvement of the coating's compactness and toughness is the reason for its anti-corrosion performance enhancement.